Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Sliding glass doors
Impact garage doorsPGTCGI
Before
After
Before
After
Before
AfterTherma-Tru Roof Replacement & Installation in Doral: What to Know First
Therma-Tru roof replacement and installation in Doral means repairing or replacing the structural roof components and the door and window units that sit under and around them. We’re an independent Therma-Tru service provider, and we handle the full job: framing corrections, flashing, weather sealing, and the unit itself. Most Therma-Tru replacement jobs in Doral are completed in one to two visits, depending on how far the surrounding wood has gone. If you own a Therma-Tru door or window that has failed or is about to, call (386) 854-7948.
This page is for homeowners in Doral who bought Therma-Tru products years ago and now have roof damage, water intrusion, or a unit that will not open or seal. You want a straight answer about what is wrong, what it costs, and how long the fix will last. That is what we do. We’ll give you a written line-item quote before any work starts, and we do not pad the bill after the fact.
Key Takeaways
- Therma-Tru roof replacement and installation in Doral is our specialty, and we handle both the door or window unit and the structural work around it.
- We register both manufacturer warranty layers in writing before our truck leaves your driveway.
- Every job is covered by the Done Right Promise: if it is not done right, we make it right, no arguing.
- The most common Therma-Tru failures we see in Doral are weather stripping failures, frame rot around the threshold, and warped door slabs from direct sun exposure.
- Free estimates: call (386) 854-7948 and a live person answers, 24 hours a day.
How Therma-Tru Products Fail and How We Fix Them
Therma-Tru builds a solid door. That is why so many Doral homes still have the original unit twenty years on. But the Florida climate exerts pressure that no door slab escapes indefinitely. Here is what we see most often on Therma-Tru roof replacement and installation calls in Doral, and what we do about it.
- Weather stripping compression set on the Classic-Craft line. The Classic-Craft and Fiber-Classic doors from Therma-Tru rely on a compression weather strip along the bottom sweep and the side jambs. In Doral, the daily cycle of humidity and dry-season heat compresses that strip until it no longer springs back. Water then finds the gap at the threshold. The real fix is not just replacing the strip, it is checking the threshold for level and re-anchoring the entire frame if needed. We replace the strip, true up the frame, and seal the joint, because the opening has to be right before the window can be.
- Frame rot at the corner joints on Smooth-Star units. The Smooth-Star line was designed as a lower-maintenance alternative to wood, and the slab itself holds up. The weak point is the frame corners where the side jamb meets the header. If the original installer caulked those corners poorly, water sits there after every afternoon storm in Doral and the composite frame eventually softens. We cut out the compromised section, rebuild the rough opening with pressure-treated stock, and install a new corner seal that drains outward instead of inward.
- Warped door slab on south-facing Therma-Tru installations. Doral gets more than three hundred days of measurable sun a year. A dark-finished Therma-Tru door on a south or southwest exposure absorbs enough heat to bow the slab over time. The door binds at the top corner in July and swings free in January. Fixing that is not just a hinge adjustment. We address the heat load by recommending a lighter finish, a storm door, or in some cases moving to a Therma-Tru model with a reinforced steel core. The replacement slab has to sit true in the opening, or the same warp returns in two years.
- Failed multi-point lock alignment on the Pulse and multi-point lines. Therma-Tru doors with multi-point locking systems, particularly the models aimed at Florida hurricane markets, depend on precise alignment between the door slab and the frame. When the roof structure above settles or the concrete slab below shifts, the lock points no longer line up and the deadbolt will not throw. In Doral, where slabs move during the dry season, this is common. We re-align the frame, not just the lock, and test every point before we call the job done.
- Poor original flashing at the door head, especially under flat and low-slope roofs in Doral. Many Doral homes have flat or low-slope roof sections over entryways, and a roof leak at the door head is often misdiagnosed as a door problem. If water gets behind the top casing and the flashing was installed flat instead of lapped, mold and rot follow. We find this on roughly a third of our Therma-Tru roof replacement and installation calls. The fix is proper stepped flashing and a head cap that sheds water away from the door, not into it. We do the roof-side work, the flashing work, and the door work in one job, because half a fix is no fix.
Our Therma-Tru Roof Replacement & Installation Process
- 1
You call and a live person answers. No phone tree, no callback form. We take down the address and the symptom, and we schedule a visit at a time that works for you.
- 2
We inspect the whole opening, not just the broken part. A Therma-Tru door that sticks might be a hinge issue, or it might be a roof leak that softened the framing. Our technician checks the slab, the frame, the rough opening, the flashing, and the surrounding roof detail before anything comes apart.
- 3
We write the quote on paper, side by side if parts are involved. OEM Therma-Tru components for a reason, or an equivalent aftermarket part when the original is obsolete. You see both lines and both costs before you choose.
- 4
We do the work. Old unit comes out, rough opening gets corrected and squared, new flashing and seal are installed, and the new Therma-Tru unit goes in. We measure every opening twice.
- 5
We test the unit in front of you. Door opens, closes, seals, locks. Water test at the threshold if needed. If it is not right, we keep working until it is.
- 6
We register both warranty layers in writing before we leave. That is The Keystone Standard. The duration is stated, the paperwork is handed to you, and the Done Right Promise covers the workmanship.
What Therma-Tru Roof Replacement & Installation Costs in Doral
No honest contractor will quote a Therma-Tru roof replacement or a door installation over the phone without seeing the opening. But here are the ranges we see in Doral right now, and they should help you know if a bid makes sense.
- Weather stripping and threshold seal replacement: $165 - $290
- Frame corner repair with new pressure-treated stock: $420 - $780
- Full Therma-Tru door replacement with new flashing and seals: $1,600 - $3,400 depending on door model, finish, and glass options
- Roof flashing and door head repair with door re-install: $700 - $1,600
- Multi-point lock re-alignment on an existing Therma-Tru door: $260 - $480
What moves the price is the condition of the rough opening, the roof detail over the door, and whether you want a like-for-like replacement or an upgrade to a higher-end Therma-Tru line. If the existing slab is warped or the frame has softened, the scope gets bigger and so does the bill. We quote that on paper and we hold to it. Call (386) 854-7948 for a free estimate. No surprises on the bill, ever.
Why Doral Homeowners Call TruePane Windows & Doors for Therma-Tru Work
We have served Doral and the surrounding communities for over forty-two years as a company, with the TruePane name carrying that tradition since 2008 when Dale Kessler founded it. Dale grew up off NW 107th Avenue when this area still had more nurseries than subdivisions. He learned glazing at Miami Lakes Educational Center, where his instructor ran him through commercial storefront systems before he ever touched a residential unit. That sequence, frame first, glass second, still shapes how our crews handle every Therma-Tru opening in Doral today.
We are not the cheapest bid. We are the last call you need to make. Every job carries the Done Right Promise, and both warranty layers are registered in writing before our truck leaves your driveway. Our technicians are background-checked and uniformed. And we are also familiar with the other major lines you might have in your home: PGT, CGI, CWS, and ES Windows. If a Therma-Tru door has failed and a neighbor’s PGT window needs service, we handle both.
FAQs
Yes, we source OEM Therma-Tru components and quality aftermarket equivalents for the older lines where Therma-Tru no longer supplies certain hardware. We show you both options on paper with prices before we order anything. Call (386) 854-7948 and we’ll identify the part you need.
Installing a Therma-Tru door properly with OEM parts and registered paperwork preserves the manufacturer warranty. The original warranty can be voided if the installation was done incorrectly or if the unit was modified. We register both warranty layers in writing before we leave the driveway, so you know exactly what is covered and for how long.
If the slab is warped, the frame has rot at the corners, or the roof flashing has failed, a full replacement is usually cheaper over five years than patching the unit every season. If the issue is a worn weather strip, a sticking lock, or a misaligned frame, a repair gets you many more years. We tell you honestly which one applies to your door, because our name goes on the work either way.
Most Therma-Tru roof replacement and installation jobs in Doral are scheduled within a few days of your call, and most are completed in one to two visits. A live person answers every call 24 hours a day, so you won’t wait on a callback. Call (386) 854-7948 and we’ll set a time.
Yes. Any structural work at the door opening or the roof above it in Doral may require a permit, and we pull the permit and schedule the inspection. We do not cut corners on code, because a door that passes inspection is a door that will not cost you later.
Written by Dale Kessler, Owner, TruePane Windows & Doors at TruePane Windows & Doors, serving Doral and nearby areas.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.