CGI Sliding & Patio Doors Nationwide | TruePane Windows & Doors

CGI Sliding & Patio Doors in Doral: What to Know First

We’re an independent CGI service provider in Doral, and most sliding door repairs on CGI products run $190 to $480 for parts and labor, with full panel replacements ranging higher depending on the series and glass package. Most jobs are completed in a single visit because our technicians carry CGI-compatible rollers, handles, and track components on the truck. If you own a CGI sliding or patio door in Doral, you’re likely dealing with a door that binds, a handle that won’t latch, or rollers that sound like gravel every time you open it.

Call (386) 854-7948

This page is written for CGI homeowners in Doral who want straight answers on repair costs, parts, and whether a door should be fixed or replaced. Call (386) 854-7948 and a live person answers, 24 hours a day, 7 days a week. No voicemail tree, no callback form.

How CGI Products Fail - and How We Fix Them

CGI builds its doors for coastal wind loads, and Doral’s climate tests them in ways the manufacturer’s testing lab never fully replicates. Here’s what we find in Doral homes, door by door:

• CGI Estate Series sliding doors: roller failure from debris in the bottom track. The Estate Series uses a stainless roller assembly that collects sand and fine grit in Doral’s dry-season dust. Homeowners hear grinding, then the door starts dragging. We remove the panel, clean the track, replace the rollers, and most doors glide like new the same day.
• CGI Clarity Series: lock stile warping during summer humidity swings. We see this on Clarity Series doors installed before 2012. The aluminum lock stile expands in August heat and the door won’t latch without a shove. The fix is usually realigning the strike plate and adjusting the interlock, not replacing the panel. The trick is knowing the difference, and our techs do.
• CGI Targa Series patio doors: threshold gasket compression over time. Doral’s storm season pounds these thresholds with driving rain. Once the gasket compresses, water wicks under the sill and homeowners see staining on the interior flooring. We replace the gasket with an OEM-spec seal and re-bed the threshold drain channels so water exits the way CGI designed it to.
• Handle sets and multi-point locks on CGI sliding doors. The multi-point lock on CGI doors is robust, but the actuator bars bind when the door settles from slab movement. Doral sits on soil that shifts seasonally, and we regularly see multi-point locks that work fine in January and bind by June. We re-time the lock, replace worn actuator components, and test the throw on the deadbolt before we leave.
• Fogged insulated glass units (IGUs) on older CGI sliding doors. After 15 to 20 years of Doral sun, the seal on a CGI IGU can fail and you’ll see condensation trapped between the panes. If the door is structurally sound, we replace the IGU at a fraction of a full door replacement. If the frame is corroded or the door no longer meets current Miami-Dade wind codes, we’ll say so plainly and quote replacement.

Our CGI Sliding & Patio Doors Process

Here’s how a CGI job goes when you call TruePane Windows & Doors:

1. 1
   Call and describe the symptom. A live person answers at (386) 854-7948. We ask about the door’s series, the year it was installed if you know it, and what it’s doing. That tells us which parts to load on the truck.
2. 2
   We inspect the opening, not just the panel. Dale Kessler grew up off NW 107th Avenue in Doral and learned the trade at Miami Lakes Educational Center, where frame-first was drilled into him before glass ever touched his hands. The opening has to be right before the window can be. We check the rough opening, the track alignment, and the header before we ever pull a roller.
3. 3
   We quote the fix on paper, side by side. OEM parts versus quality aftermarket, with the difference explained. No surprises on the bill. We tell you the price before we start, and that’s the price on the invoice.
4. 4
   We repair, not rig. The panel comes out, the tracks get cleaned and squared, components get replaced, and the door gets re-set. If we find frame damage, we show you photos and talk options before touching anything.
5. 5
   We test everything with the door loaded. We cycle the door open and closed multiple times, check the lock throw, run the panel back and forth, and then we run water on the threshold gasket to confirm no weep-channel blockage.
6. 6
   We register the warranty. The Keystone Standard means both manufacturer warranty layers are registered in writing, durations stated, before the truck leaves your driveway. Every job is backed by our Done Right Promise: if it’s not done right, we make it right, no paperwork fights and no arguing.

What CGI Sliding & Patio Doors Cost in Doral

Here’s honest pricing for the CGI work we do most often in Doral:

• Roller replacement (single panel): $190 to $320, depending on whether the panel needs realignment and track cleaning.
• Handle set replacement with multi-point lock re-timing: $180 to $380, parts included.
• Threshold gasket and drain channel re-bed: $160 to $290, including cleaning out the weep channels.
• Fogged IGU replacement on a CGI sliding door: $480 to $950 depending on glass size, low-E coating, and whether the panel is an Estate or Clarity series.
• Full panel replacement with new frame and glass: quoted per job, typically $1,800 to $4,200 depending on series, glass package, and size.

What moves the price is the age of the door, whether parts are still in production, and whether the panel has settled out of square. If the frame is ruined, we will not patch it and call it a repair. A square deal means you know before anyone reaches for a tool. Call (386) 854-7948 for a free estimate. We quote in writing and stand behind it.

Why Doral Homeowners Call TruePane Windows & Doors for CGI Work

We are not the cheapest bid in the room, and we will not pretend otherwise. We serve Doral homeowners who have lived in their house twenty years and plan to stay thirty, the ones who remember the contractor that left a fogged seal and a door that bound every July. TruePane has been serving local communities since 2008, founded in 2008 by second-generation glazier Dale Kessler, and we hire local, train apprentices into journeymen, and act like a company that plans to be in town thirty years from now because we do plan to be. Our technicians are background-checked, uniformed, and they work in your home the way they would work in their own mother’s. We also service Andersen, Pella, and PGT sliding and patio doors, so if a CGI door is beyond reasonable repair, we can quote a replacement from a line that fits your budget and your wind-code needs. The Done Right Promise covers every job, in writing.

FAQs