VLX 100 Pivot Door

VLX 100 Pivot Door in Doral, FL | TruePane Windows & Doors

The VLX 100 Pivot Door is a full-height aluminum statement piece that turns on a vertical center axis instead of traditional side hinges. It’s the kind of entry you see on modern waterfront homes in Doral and high-end commercial lobbies, where oversized glass and clean sightlines matter more than conventional trim. TruePane Windows & Doors is an authorized ViewLux installation partner based in Doral, which means you get factory-backed product support and a local crew that installs to the exact standard the warranty requires. If you’re pricing one for a Doral project, call (386) 854-7948 for a free on-site measurement and written quote.

Call (386) 854-7948

Product Overview - VLX 100 Pivot Door

The VLX 100 is built for homeowners and architects in Doral who want a door that doesn’t look like every other door on the block. Instead of swinging from a side jamb, the panel rotates on a pivot point set into the floor and header. That single design decision changes everything about how the door feels: you can run a panel up to 60 inches wide and 120 inches tall, which is far beyond what a conventional hinged system handles comfortably. The result is a wall of glass with a slim aluminum frame that reads more like a window than a door.

ViewLux engineers this series around a heavy-duty aluminum profile with a 2.56-inch face width and a 0.098-inch wall thickness. That’s substantial metal. It resists racking, holds flat over a long service life, and gives the hardware something solid to bite into. In Doral’s humidity and afternoon storms, that rigidity pays off. A flimsy frame will flex, sag, and eventually drag on the threshold. The VLX 100 doesn’t.

Where does it fit architecturally? Think contemporary single-story homes in Doral’s newer subdivisions, mid-century remodels, and commercial storefronts where the entry is part of the brand. Buyers choose this series when they want a grand, unobstructed entrance with oversized lites and a finish that coordinates with their window package.

Technical Specifications

Here are the loaded dimensions and configuration options for the VLX 100 Pivot Door as installed by TruePane Windows & Doors in Doral:

• Wall thickness: 0.098-inch extruded aluminum, heavy-duty architectural grade
• Profile width: 2.56 inches, slim-line face for minimal sightline obstruction
• Maximum panel size: up to 60 inches wide × 120 inches tall (single panel)
• Pivot mechanism: vertical center-axis rotation, floor and header mounted
• Glass options: Clear, Frosted, Obscure, Low-E, Tempered, Laminated
• Finish options: Premium Black, Pure White, Anodized Silver, Bronze, Champagne, Teak Wood
• Performance compliance: AAMA 2400/2410 installation standard; AAMA 812 low-expansion foam sealant at all perimeter joints
• Impact resistance: available with laminated glass for wind-borne debris regions

Exact panel sizing depends on the opening, wind-load calculations for your Doral address, and your glass selection. A thicker laminated lite adds weight and may affect the maximum practical width. We run all of that before quoting so the number we give you is the number you pay.

Performance Features

Thermal Efficiency
ViewLux builds a thermal break into the VLX 100 profile, which separates the interior and exterior aluminum so heat doesn’t conduct straight through the metal. The door carries NFRC-rated energy performance. In Doral’s summer heat, that break plus a Low-E glass package keeps the air-conditioned side cool to the touch and cuts cooling load.

Acoustic Performance
Laminated glass adds a sound-dampening interlayer that measurably reduces exterior noise. That matters on Doral streets with steady traffic or near commercial corridors. We’ll spec laminated lites when sound control is a stated priority, and the frame’s tight seals do the rest.

Airtightness & Weather Seal
The VLX 100 uses compression gaskets and a full-perimeter seal strategy. Install matters here. TruePane follows AAMA 2400/2410 so the seal performs as tested, and we apply AAMA 812 low-expansion foam at every perimeter joint. No gaps, no whistle, no dust.

Waterproofing
Mist prevention and water management are engineered into the threshold and frame drainage. Our Doral installs include a water test after setting the door to verify nothing gets past the sill or perimeter joints before we call the job done.

Wind Resistance
Doral sits in a high-wind region, and the VLX 100 is wind-load rated for local code requirements. When the project calls for impact resistance, we pair the frame with laminated glass to meet wind-borne debris standards without changing the profile’s look.

Security & Hardware
Pivot doors carry a lot of mass hardware is spec’d accordingly. The pivot mechanism and latch points are built for repeated daily cycling on a heavy panel. Aluminum frames like this resist forced-entry leverage better than wood or vinyl alternatives.

Color & Glass Options

The VLX 100 comes in six finishes. Premium Black is the current favorite across Doral’s modern builds, especially paired with black window frames. Pure White suits coastal-inspired elevations and reads crisp against stucco. Anodized Silver has a machined, commercial look that works well on office entries and contemporary condos. Bronze warms up a facade and hides fingerprints better than dark black. Champagne is a softer metallic that complements travertine and warm stone accents common in Doral’s Mediterranean-style homes. Teak Wood uses a wood-grain finish over aluminum, ideal when HOA guidelines favor warm entry tones but you don’t want the upkeep of real timber.

On the glass side: Clear maximizes daylight and views. Frosted and Obscure give privacy while still passing light, which suits entries facing a sidewalk or neighboring property. Low-E cuts solar heat gain, a genuine comfort factor in Doral. Tempered is safety glass and required by code in most door applications. Laminated adds impact resistance and sound control, and it’s the option we recommend most often for Doral homes.

Installation by TruePane Windows & Doors in Doral

A pivot door this size is not a standard swap. The panel weighs hundreds of pounds, and every degree of misalignment compounds at the outer edges. The pivot point has to be set dead level, the header has to carry the point load, and the floor anchoring has to hold without cracking tile or slab. When a pivot door drags, sticks, or swings shut on its own, it’s almost always because the installer rushed the setting. That same rush can void the manufacturer’s warranty.

TruePane Windows & Doors installs the VLX 100 in Doral the way the factory intends. Our process starts with a pre-install inspection of the rough opening, the slab condition, and the existing wall assembly. From there we set the frame level, plumb, and square before the panel ever hangs. We use AAMA 812 low-expansion foam sealant at all perimeter joints, then follow the AAMA 2400/2410 installation standard from shimming through anchoring. After the panel is mounted and the hardware is adjusted, we run a water test on the threshold and perimeter. The last step is a full clean-up and a walkthrough of operation and maintenance.

Doral adds its own considerations. The humidity accelerates corrosion on uncoated hardware, so we verify every component is properly sealed. Afternoon storms test water management immediately. And local building codes require wind-load documentation we’re familiar with from permitting on doors across the area.

Frequently Asked Questions - VLX 100 Pivot Door

Get a Quote - VLX 100 Pivot Door in Doral

The VLX 100 is a signature piece, and it deserves an install that matches the engineering. TruePane Windows & Doors serves Doral as an authorized ViewLux partner, which means factory-correct installation, real warranty protection, and a crew that’s installed pivots across the area.

Call (386) 854-7948 to schedule a free on-site measurement and written quote for your Doral project.

Written by the team at TruePane Windows & Doors, authorized ViewLux installation partner serving Doral, FL.