Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Sliding glass doors
Impact garage doorsPGTCGI
Before
After
Before
After
Before
AfterArched & Curved Windows in Doral, FL
Replacing arched or curved windows in Doral homes requires specialized measuring and installation techniques that standard rectangular window units simply do not accommodate. Arched windows, often found in Mediterranean-style architecture common throughout Doral neighborhoods like Doral Isles and Doral Park, frequently suffer from seal failure or frame warping due to the intense Florida sun and humidity. At TruePane Windows & Doors, we provide precision replacement for these geometric openings, ensuring a weathertight seal that protects your home from moisture intrusion. If you have an arched window that is fogging, binding, or leaking, call us at (386) 854-7948 for a free estimate.
Because these windows are custom-manufactured to match the specific radius of your existing masonry or frame opening, the installation process is more involved than a standard window swap. We approach every arched window project as part of our broader Custom & Geometric Windows in Doral service, ensuring that the new unit fits perfectly within the unique curvature of your home. We are authorized installers for lines like ECO Window Systems and PGT, which allows us to provide durable, impact-resistant options that meet local building codes for our climate.
When You Need Arched & Curved Windows
Homeowners often wait too long to address issues with arched or curved windows because they assume the repair will be impossible or prohibitively expensive. We recommend checking your windows for these specific signs of failure to prevent structural damage to the surrounding wall:
- Seal failure and fogging: If you see condensation trapped between the panes of your arched window, the insulating gas has escaped. This is a common issue in Doral due to thermal expansion and contraction, and it means the window is no longer energy efficient.
- Operational binding: If your arched window is an operable casement or single-hung unit and it sticks or requires significant force to open, the frame may have shifted or the sash may have warped. Forcing these units can damage the crank mechanism or the frame header.
- Water intrusion at the apex: Because arched windows have a curved top, water can sometimes pool at the transition points if the flashing was not installed correctly or has degraded over time. If you notice staining on the interior drywall or trim around the arch, the seal is compromised.
- Drafts and energy loss: If you feel a temperature difference near the window during the hottest parts of the day, the weatherstripping around the curve has likely lost its elasticity. This forces your HVAC system to work harder to maintain comfort in your home.
- Visible frame degradation: Exposure to the Florida sun can cause wood frames to rot or vinyl frames to become brittle and crack. If the frame around the curve is soft or shows stress fractures, the structural integrity of the unit is at risk.
If you notice any of these issues, call (386) 854-7948. We can assess whether the unit needs a full replacement or if the issue is limited to the glazing or hardware components.
Our Arched & Curved Windows Process
Precision is the only way to handle arched and curved windows. A mistake of even an eighth of an inch can leave a gap that allows moisture to enter your home or prevents the window from locking properly. We follow a strict, multi-step process for every project:
- Initial Assessment and Measurement: We do not rely on standard measurements. Our technicians visit your home to measure the exact radius of the arch, the depth of the jamb, and the condition of the surrounding structure. We document the specific geometric profile of your existing opening to ensure the new unit is a perfect match.
- Manufacturer Selection: We review the specific requirements for your home with you. Whether you need impact-rated glass for hurricane protection or specific energy-efficient coatings to handle the Doral heat, we provide side-by-side quotes on paper for manufacturers like Mr-Glass and ECO Window Systems.
- Custom Manufacturing: Once you approve the quote, we order the unit based on our verified measurements. Because these are custom-built, the manufacturer crafts the frame to the specific curve of your home, rather than forcing a standard unit into the opening.
- Precision Installation: Our team removes the old unit, cleans the opening, and inspects the rough framing for any signs of water damage. We set the new arched window, ensuring it is plumb, level, and square-even when the window itself is round. We apply high-grade sealant specifically rated for our climate to ensure a watertight finish.
- The Keystone Standard Inspection: Before we leave your driveway, we register both manufacturer warranty layers in writing. We ensure the window operates smoothly, the locks engage properly, and the exterior trim is sealed. This is part of our Done Right Promise, which guarantees our workmanship.
Arched & Curved Windows Pricing in Doral
Arched windows are priced based on the complexity of the radius, the type of glass required (such as impact-resistant or tempered), and the frame material. Because each unit is custom-manufactured, prices vary widely. In Doral, a standard replacement for an arched window typically ranges from $1,200 to $3,500 per unit, depending on whether the unit is fixed or operable. Operable arched windows, which require specialized hardware and mechanical balances, are at the higher end of that range.
| Window Type | Estimated Cost Range |
|---|---|
| Fixed Arched Window (Standard) | $1,200 - $2,200 |
| Operable Arched Window | $2,000 - $3,500+ |
| Impact-Resistant Upgrade | Add $400 - $800 per unit |
We provide upfront, written quotes. We do not use “starting at” pricing to lure you in, only to inflate the bill later. Our quotes include the cost of the unit, the professional installation, and the disposal of your old window. Call (386) 854-7948 today to schedule a free estimate at your home.
FAQs - Arched & Curved Windows
Can you replace an arched window without removing the surrounding drywall or stucco?
Yes, in most cases, we can perform a pocket replacement or a retrofit that allows us to install the new arched window without disturbing your interior walls or exterior stucco. We carefully remove the existing sash and frame, prep the opening, and install the new unit within the existing footprint. If the original frame is severely rotted or damaged, we will discuss the necessary repairs before proceeding to ensure the new window is supported correctly.
Is it better to repair or replace a leaking arched window?
If the leak is caused by a failed seal between the glass panes, the unit must be replaced because the insulating gas has already escaped and cannot be replenished. If the leak is caused by failing exterior sealant or weatherstripping, we may be able to repair it, but if the window is older and showing signs of frame rot, replacement is usually the most cost-effective long-term solution. Call (386) 854-7948 so we can inspect the unit and give you an honest recommendation.
Do you offer impact-resistant arched windows for hurricane protection?
Yes, we are authorized installers for several manufacturers that produce high-performance, impact-resistant arched windows designed to meet Florida building codes. These units are built with reinforced frames and laminated glass, providing a significant layer of security against debris and high winds. We can match these units to your existing aesthetic while upgrading your home’s safety.
How long does it take to get a custom arched window installed?
Because these windows are custom-manufactured to the specific dimensions of your home, they are not available off the shelf. After we measure your opening and you approve the order, the manufacturing process typically takes several weeks. Once the window arrives at our shop, we will contact you to schedule a single-visit installation. We prioritize clear communication throughout the process so you know exactly when to expect your new window.
Written by Dale Kessler, Owner at TruePane Windows & Doors, serving Doral.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.