Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
ES Windows Custom & Geometric Windows in Doral: What to Know First
We repair and replace ES Windows custom and geometric units across Doral, including arched, radius, trapezoid, and oversized openings that most shops will not touch. Most residential jobs run one to three days from tear-out to final caulk, and you will get a written line-item quote before any work starts. We are an independent ES Windows service provider, not a factory rep, which means we call problems the way we see them. Call (386) 854-7948 if you own a Doral home with shaped ES Windows glass that is failing or an opening that needs a true custom solution.
How ES Windows Products Fail, and How We Fix Them
ES Windows builds a solid product, especially their impact lines. But every window in South Florida eventually meets something it cannot outlast. Here is what shows up in Doral specifically:
- Condensation between panes on ES Custom radius units. Arched and curved lites put more perimeter stress on the seal than a square sash. Once the desiccant inside the spacer saturates, moisture shows up as fog. We remove the sash, take it to a controlled shop environment, and reglaze with a fresh IG unit matched to the original radius. This is not something to attempt in the driveway with a heat gun.
- Frame racking on ES oversize sliders. Doral sits on reclaimed wetland fill. Slabs move. A ten-foot slider in a poured tie-beam opening may have shifted an eighth of an inch, and then the panel binds or the lock no longer lines up. We reset the frame, shim behind the anchor points, and re-square before remounting the panels.
- Roller and track wear on ES geometric picture windows that open. Half-round and eyebrow windows above fixed panes see direct afternoon sun from the west. Aluminum tracks expand, rollers flatten, and the window starts to grind. On ES units, the factory roller is fine, but a quality aftermarket stainless roller often outlasts it in the Doral salt-and-UV mix.
- Dry-rot at the rough opening of ES custom corner windows. Corner installations leave less room for proper flashing. If the original installer used builder cloth instead of taped pan flashing, water wicks behind the stucco. The window itself is rarely the problem. The opening is. We remove, repair the sub-sill, reset with proper membrane, and reinstall.
- Stuck or cracked glass on ES trapezoid and triangular units. Non-rectangular tempered lites are cut to spec. A hairline impact crack along the narrow top edge spreads under thermal cycling. You cannot field-cut tempered glass. The replacement has to be ordered to the template. We have a local Miami-Dade glass fabricator who templates and cuts custom shapes for ES frames, which keeps lead times reasonable.
Our ES Windows Custom & Geometric Windows Process
- 1
Call and speak to a person. You get a live dispatcher, not a menu. We log your opening size, glass shape, and what you are seeing.
- 2
On-site measurement and inspection. A background-checked tech comes out. Every opening is measured twice. We check the frame, the flanges, the reveal, and the condition of the rough opening behind the stucco.
- 3
Parts decision: OEM versus aftermarket. For warranty-critical components like seals and balances, we recommend ES factory parts. For wear items like rollers and weatherstripping, we offer quality aftermarket options at better value. You see both on paper.
- 4
Workshop fabrication or field installation. Custom IG units are built off-site to template. Repairs and replacements happen on-site. Our techs clean up as they go.
- 5
Testing and register. We cycle the unit, check the operation, and verify the seal. Before the truck leaves, both manufacturer warranty layers are registered in your name with durations in writing.
- 6
Done Right Promise. If something is not right, we come back and make it right. No argument about who did what.
What ES Windows Custom & Geometric Windows Costs in Doral
Straight numbers for common scenarios:
- Reseal a fogged ES arched unit (under 4 ft): $280 to $520
- Replace tempered trapezoid glass in an existing ES frame: $350 to $750 depending on area and thickness
- Full ES custom radius window replacement (rough opening work included): $1,800 to $4,200
- Oversized ES slider re-track and roller replacement: $180 to $420
- Custom geometric impact unit, new installation: $2,500 to $6,800 depending on opening size, DP rating, and glass package
What moves the price is the rough opening condition, the glazing spec, and whether the sash can be saved. You get a fixed quote with no change orders. Call (386) 854-7948 to schedule a free estimate.
Why Doral Homeowners Call TruePane Windows & Doors for ES Windows Work
Dale Kessler grew up off NW 107th Avenue when Doral still had more nurseries than subdivisions. He has watched this city build itself up one slab at a time, and he knows how openings move here. His crews are trained to look at the rough opening before the glass, because the opening has to be right before the window can be. We are authorized installers for more than a dozen manufacturers, including PGT, CGI, CWS, ECO Window Systems, and ES Windows, which means if an ES unit is beyond saving, we can quote you a comparable manufacturer on the same sheet of paper. Every job carries the Done Right Promise and The Keystone Standard: both warranty layers registered in writing before the truck leaves your driveway. We have been serving Doral for over forty-two years through the Kessler family, and we plan to be here when the next window fails. A square deal, in writing, every time.
FAQs
Yes. We template the opening and the existing sash, then order an IG unit cut to the exact radius or angle. The new unit drops into the existing ES frame or we build a matching frame if the original is beyond repair. Call (386) 854-7948 and we will walk you through it.
It can, if the wrong shop does the work. We register the glass replacement with the manufacturer and use ES-compatible components, so the remaining factory coverage stays intact. If the original warranty has already expired, our Done Right Promise still covers the labor.
We keep common rollers, balances, weatherstripping, and lock hardware for ES frames on hand. Custom IG units and non-stock extrusions are ordered to template, typically one to two weeks out depending on fabrication. We tell you the lead time before we start.
If the frame is square and the glass is the only issue, a reglaze makes sense, usually under $750. If the frame is racked, the sub-sill is rotted, or the unit has multiple leaks, replacement is the honest call. We give you both numbers side by side and let you decide.
For a broken pane or a failed seal that has compromised the opening, we typically schedule within a few days. Custom glass takes longer because it is cut to template. A live person answers the phone around the clock at (386) 854-7948.
Call TruePane Windows & Doors for Your ES Windows Custom or Geometric Project
If your ES Windows custom or geometric unit in Doral is fogged, cracked, binding, or just not closing true, call (386) 854-7948. We will send a technician to measure the opening, explain exactly what is wrong, and give you a written quote with both warranty layers registered in your name. Free estimates, straight pricing, and a guarantee we put in writing before we leave the driveway.
Written by Dale Kessler, Owner, TruePane Windows & Doors at TruePane Windows & Doors, serving Doral and nearby areas.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.



Before
After
Before
After
Before
After