Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Sliding glass doors
Impact garage doorsPGTCGI
Before
After
Before
After
Before
AfterCGI Door Installation: The Doral Owner’s Guide
CGI door installation in Doral typically runs $450 to $1,900 installed depending on the door type, panel count, and hardware involved, and most single-door swaps are completed the same day we arrive. We stock CGI-compatible rollers, hinges, handlesets, thresholds, weather stripping, and strike plates on our trucks, and we install them against the rough opening the way CGI’s engineering intends. Most Doral homeowners call us after a door starts dragging across the threshold, a handle rattles loose at the rail, or a slider jumps its track during a summer afternoon when the frame has swollen tight against the jamb.
If your CGI door no longer closes square, latches cleanly, or rolls without a fight, the part you need is matched to your model and installed by someone who has done this in Miami-Dade heat long enough to know what it looks like when it’s wrong. Dale Kessler grew up off NW 107th Avenue back when Doral had more nurseries than subdivisions, and he still treats every CGI door install as a rough-opening job first. The opening has to be right before the window can be.
Which CGI Models This Applies To
CGI manufactures several impact-rated door lines, and each one takes hardware in specific sizes. The ones we service and install most often across Doral are the Estate Collection, the Classic Collection, and the Targa series, along with older CGI models installed back when the original product badges were red and white. The compatibility gotcha with CGI is that hinge and roller dimensions are not universal even within the same series. A 2008 Estate Collection door and a 2022 Estate Collection door can take different hinge mortise depths, and the roller diameters change with panel weight ratings.
Before anything gets ordered, we pull the sticker from the door edge or the top corner of the panel. CGI stamps a serial number and a Miami-Dade NOA (Notice of Acceptance) number on a foil label, and that label is how we confirm the exact model, glass package, and hardware spec. If the label is gone, we measure the roller, the hinge leaf, the threshold height, and the reveal around the panel, then match against CGI’s current parts list. In most cases, we recommend OEM CGI parts on impact-rated panels because the door was tested as a complete assembly with those exact components. On non-impact interior swinging doors, a quality aftermarket hinge or threshold from a manufacturer like Prime-Line or Stanley can be a sound, less expensive choice. TruePane Windows & Doors is an independent service provider, not affiliated with CGI, which means we stock both OEM and proven aftermarket options and quote them side by side on paper so you decide with the numbers in front of you.
We also keep hardware for Andersen, and Pella doors on the truck for homes that mix product lines across different openings.
Signs Your CGI Door Installation Is Failing
- The door drags or scrapes across the threshold. This is usually a worn roller or a hinge that has dropped, not a door that suddenly changed shape. In Doral, we see this most on west-facing doors where afternoon heat expands the aluminum and the track enough to bind the panel.
- The handle or deadbolt no longer lines up with the strike plate. The jamb has settled or a hinge leaf has worked loose. Forcing the lock will chew up the latch and eventually crack the mortise around the strike, which turns a small hardware job into a jamb repair.
- Sliding door jumps off the track or grinds when it moves. Rollers with flat spots or broken ball bearings are the cause. Impact-rated CGI sliders are heavy, and worn rollers put all that weight on the bottom track, which then wears through the track groove.
- The weather stripping at the sill has gone flat or is peeling away. In Doral’s humidity and heat, foam and rubber stripping degrade faster than most homeowners expect. A failed seal lets water in at the threshold during afternoon storms and lets air-conditioned air escape every other day.
- The door rattles in the frame when wind gusts hit it. On impact doors, a loose panel is a sign the top and bottom adjustments have drifted or the hinge shims have compressed. A rattling CGI door is still water-resistant, but it is not doing the wind-load job the label says it will.
Replacement Cost & What’s Included
How much does CGI door installation cost in Doral?
Most single-panel CGI door hardware and installation jobs in Doral run from $450 to $1,900 with parts and labor included. What you pay depends on the part, the door type, and how far gone the damage is:
- Roller replacement on a sliding CGI door: $180 to $420 installed. Includes the panels off, both rollers replaced, track cleaned, and the door rehung square.
- Hinge replacement on a swinging CGI door: $250 to $600 installed. Includes three or four hinges matched to the mortise depth, panel rehung, and reveal adjusted.
- Handleset or deadbolt replacement: $220 to $550 installed. Includes new hardware, strike plate alignment, and a test of the latch throw against the jamb.
- Threshold and weather stripping replacement: $260 to $580 installed. Includes old threshold pulled, sub-sill checked for rot or corrosion, new threshold set in sealant, and stripping mated to the door sweep.
- Full door rehang or jamb repair: $600 to $1,900 installed. Includes jamb reinforcement, shim rework, door recut if needed, and hardware reset.
Every one of these prices is quoted upfront, in writing, before the first tool comes off the truck. We do not add surprise line items. You get a written line-item quote that lists the part, the labor, and any disposal, and the amount on the quote is the amount on the bill. Workmanship is covered by the Done Right Promise. Both manufacturer warranty layers on any new part get registered in writing with serial numbers noted before we leave your driveway, under The Keystone Standard.
DIY or Call Us?
You can safely inspect the label on your door edge, check which screws have loosened, and note where the door is dragging. That is useful information to have ready when you call. What we would not do on a CGI impact-rated door is try to pull the panel off its track, rehang a swinging door on new hinges, or cut into a threshold without checking what sits under it. The panels are heavy, the hardware is under tension, and a door that slips during a repair can take a hand or a foot with it. The other thing we see after homeowner attempts is a door that looks fixed at noon and binds again by sundown, because the frame and the panel were never aligned in the first place. If you want to know whether it is a roller, a hinge, or a jamb issue, call (386) 854-7948 and describe what you are seeing. We will tell you honestly whether it is a job for us or something you can handle with a screwdriver and patience.
FAQs
A properly installed CGI impact door will last 25 to 30 years in Doral, but the moving hardware sits on a different clock. Rollers, hinges, and weather stripping are wear items, and in our heat and humidity, most need attention every 8 to 12 years even when the panel and frame are still fine. If your door is approaching its second decade in a Doral home, assume the hardware is the weak link, not the door itself. Call (386) 854-7948 and we will tell you what you are looking at.
Some parts can be repaired, most should be replaced. A hinge leaf that has pulled loose can sometimes be reseated with longer screws and new shims. A roller with a flat spot cannot be repaired, and a threshold that has worn through its weather groove is done. Weather stripping is never worth patching. We will tell you which one you have before any work is quoted. Estimates are free.
Most single-panel roller, hinge, or handleset replacements take 45 to 90 minutes once the right part is confirmed. A full rehang with jamb work can take a half day. We do not carry every CGI part for every model on the truck, but we carry the common ones, and if your part needs to be ordered, we tell you that on the first call, not after we arrive.
We stock CGI-compatible rollers, hinges, handlesets, thresholds, and weather stripping for the most common Estate, Classic, and Targa configurations on our trucks. For less common models or specific finishes, we source OEM parts directly and confirm lead time before you commit. Call (386) 854-7948 with your door’s serial number and we will match it while you are on the phone.
Call TruePane Windows & Doors in Doral
If your CGI door is dragging, rattling, or refusing to latch, call (386) 854-7948. A live person answers, every time, and we will schedule a free estimate at your Doral home with the exact part and price on paper. We have been doing this work in Miami-Dade for decades, and we still measure every opening twice before anyone reaches for a shim. That is how you get a CGI door that closes the way it did on day one.
Written by Dale Kessler, Owner, TruePane Windows & Doors at TruePane Windows & Doors, serving Doral and nearby areas.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.