Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Sliding glass doors
Impact garage doorsPGTCGI
Before
After
Before
After
Before
AfterCGI Energy-Efficient Windows in Doral: What to Know First
CGI energy-efficient window service in Doral typically runs $140-$380 for glass replacement, $220-$640 for full sash work, and $850-$2,400 per opening when a complete replacement makes more sense than a repair. Most jobs are completed in a single visit, and we give you a written line-item quote before any work starts. This page is for Doral homeowners who own CGI windows and want straight answers about repair versus replacement, energy ratings, and what actually holds up in South Florida heat. If you already know the issue, call (386) 854-7948 and tell us what you’re seeing. A live person answers.
How CGI Products Fail - and How We Fix Them
CGI builds a heavy impact window. The frames are aluminum, the glass is laminated, and the whole assembly is engineered to take a hit. But after ten or fifteen years of Doral sun and salt air, even CGI units show their age. Here are the specific failures we see on CGI energy-efficient windows in Doral, by series where it matters:
- Sentinel Series seal fogging at the lower corners. The Sentinel line uses a dual-pane insulated glass unit (IGU) with a spacer bar. In Doral’s humidity, the desiccant inside that spacer eventually saturates. Once it does, moisture creeps into the airspace and you get the fog you can’t wipe off. The fix is an IGU replacement, not a window replacement. We remove the old sash, order the new IGU sized to the exact opening, and set it with fresh setting blocks. The frame stays.
- Estate Collection thermal breaks losing contact with the frame. CGI’s Estate windows have a thermal break in the aluminum frame, which is what keeps the outer frame from conducting heat straight into your air-conditioned living room. Over time, that break can pull away from the extrusion in certain spots, especially on west-facing walls in Doral where afternoon sun hits hard. We test the frame with an infrared thermometer, find the dead spots, and re-secure the break before it costs you a full window.
- Targa series interlock wear at the meeting rail. Targa is a horizontal roller line, and the interlock where the two sashes meet is where air leaks start. The weatherstripping there gets brittle under UV exposure. You’ll feel a warm draft at face height on windy days. We replace the interlock weatherstripping and adjust the rollers so the sashes close tight again. It’s a two-hour job most of the time.
- Low-E coating degradation on older CGI glass packs. CGI’s Low-E coatings are applied at the factory, but nothing lasts forever in Florida sun. If you notice a hazy or slightly oily sheen on the inside of the glass that won’t clean off, that’s the Low-E layer breaking down. The window still functions, but the energy performance is gone. We’ll tell you honestly whether a new IGU with fresh Low-E makes sense or whether the frame is worn enough that replacement is the smarter money.
- Weep hole blockage causing water to pool in the track. This is more of a maintenance issue than a defect, but it shows up constantly on CGI sliders in Doral. Leaves, dirt, and lawn debris clog the weep holes, water backs up, and the track starts corroding. A corroded track drags the rollers, the sash sits crooked, and air gets in. We clear the weep system and, if the track is pitted, we can replace the track rather than pulling the whole frame out of the wall.
Our CGI Energy-Efficient Windows Process
Here’s how a CGI energy-efficient window job runs from the first call to cleanup:
- 1
You call and describe the symptom. Fog between panes, a draft, a track that binds, condensation that never dries. The person who answers the phone is in our office, not a call center, and they’ll ask about the window’s age and which room it’s in.
- 2
We schedule a diagnostic visit. A uniformed, background-checked technician comes out, measures the opening twice, and checks the frame with an infrared thermometer. For CGI units, we look specifically at the thermal break, the IGU spacer, the weatherstripping, and the interlock.
- 3
You get a side-by-side quote on paper. We show you OEM CGI parts pricing next to quality aftermarket options when they make sense, with the warranty difference for each. No pressure, no rush. You decide what fits your budget.
- 4
The repair. We order the right IGU or parts, then come back and set the glass properly. That means fresh setting blocks, correct shim placement, and making sure the rough opening is still square before the new unit goes in. Dale Kessler’s rule: the opening has to be right before the window can be.
- 5
Test and tune. After the window is set, we run a daylight gap check around the perimeter, test the operation, and balance the sash if it’s a single or double hung. If it’s an impact unit, we confirm the laminate is intact and seated.
- 6
Warranty registration and the Done Right Promise. Before the truck leaves the driveway, both manufacturer warranty layers are registered in writing with durations stated. If anything isn’t done right, we make it right within 90 days. No paperwork fights.
What CGI Energy-Efficient Windows Costs in Doral
Here are the ranges we see for common CGI energy-efficient window work in Doral. Every job gets a written line-item quote before we touch anything:
- Single-pane to Low-E insulated glass unit (IGU) replacement: $140-$380 per sash
- Full weatherstripping and interlock rebuild on a CGI slider: $180-$420 per window
- Thermal break repair or re-securing on Estate or Sentinel frames: $250-$640 per window
- Complete CGI window replacement with new energy-efficient IGU: $850-$2,400 per opening
What moves the price: window size, whether you need OEM CGI glass or a quality aftermarket IGU, ladder or lift access on second-story units, and whether the frame is still square. If the frame is corroded or the thermal break is shot across multiple windows, replacement usually beats repairing piece by piece. Call (386) 854-7948 for a free estimate, and we’ll put numbers on your specific windows.
Why Doral Homeowners Call TruePane Windows & Doors for CGI Work
We’re not the cheapest bid in Doral, and we’re not trying to be. We’re the company you call when the window has to be done right and you don’t want to argue about it later. TruePane has been serving local communities since 2008 through a heritage of craft that started long before Dale Kessler founded the company in 2008. Every CGI job we take is an independent service job, and every one of them is covered by the Done Right Promise: if it’s not done right, we make it right. We also install and service other major lines including Andersen, Pella, and PGT, so if your CGI unit is beyond saving, we can quote you a fair comparison across manufacturers side by side on paper. You’ll see exactly what you’re buying. And our seniors and veterans get a permanent 5% discount, no coupon required.
FAQs
Yes, we can perform most energy-efficient window repairs on CGI products without voiding the original warranty, because we use OEM CGI parts where the warranty requires them and document every step. As an independent CGI service provider, we are not authorized by CGI, but we know which repairs are warranty-sensitive and which ones are safe to handle aftermarket. If your unit is still under the original CGI warranty, we’ll tell you before we recommend any part that could affect it. Call (386) 854-7948 and we’ll sort it out before you spend a dollar.
Replacing a fogged insulated glass unit in a CGI window in Doral typically costs between $140 and $380 per sash, depending on the window’s size and whether you go with OEM CGI glass or a quality aftermarket IGU. Fogging is a desiccant failure, not something you can clean off. We size the new IGU to the exact opening and set it with fresh setting blocks so it seats properly. For an exact quote on your window, call (386) 854-7948. Estimates are free.
If your CGI frames are square, the thermal breaks are intact, and the only issue is the glass or weatherstripping, repair is almost always the better money. If multiple windows on the same wall show corroded frames, failed interlocks, and worn thermal breaks, replacement starts making more sense. We’ll put both options on paper with real numbers and let you decide without pressure. Call (386) 854-7948 for a free estimate and we’ll walk you through it at your kitchen table.
Most CGI glass and weatherstripping parts are available within five to ten business days, and the majority of our Doral jobs are completed in a single visit once the parts arrive. If the issue is a track adjustment, roller replacement, or interlock rebuild, we usually finish the same day we start. We’ll give you a clear timeline when you call (386) 854-7948, and we stand behind it.
Every CGI window repair we do is covered by the Done Right Promise, which means if the work isn’t done right, we make it right within 90 days with no paperwork fights and no arguing. Both manufacturer warranty layers are registered in writing with durations stated before the truck leaves the driveway. That’s The Keystone Standard, and it applies to every job, no exceptions.
Written by Dale Kessler, Owner, TruePane Windows & Doors at TruePane Windows & Doors, serving Doral and nearby areas.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.