Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Sliding glass doors
Impact garage doorsPGTCGI
Before
After
Before
After
Before
AfterCGI Impact Windows & Doors in Doral: What to Know First
CGI impact windows and doors in Doral can be repaired, serviced, and replaced by an independent CGI service provider like TruePane Windows & Doors, and most jobs are done in a single visit. Our pricing runs honest and itemized, with no surprise line items, and every CGI job is covered by our Done Right Promise in writing. If you own a CGI window or door that binds, leaks, fogs, or won’t latch after a storm, call (386) 854-7948.
This page is for Doral homeowners who already own CGI products and need someone who understands how they’re built, how they fail, and how to fix them without voiding a warranty. We’re not affiliated with CGI. We’re a local glazing company that has worked on CGI windows and doors across Doral for years, and we know what holds up in this climate and what doesn’t.
How CGI Products Fail - and How We Fix Them
CGI builds a solid impact product, but every window line has weak points. Here’s what we see on CGI units in Doral, series by series.
- Sentinel Series casements and horizontals with sagging sashes. The Sentinel line uses a heavier aluminum frame than CGI’s Estate series, and over time the corner keys in the sash work loose from repeated opening pressure. The sash starts to drag on the track or won’t seat square against the weatherstripping. We re-square the sash, replace the corner keys, and re-set the hardware rather than letting the frame rack worse.
- Estate Series single-hungs with balance shoe failures. In Doral’s humidity, the coil spring balances in Estate single-hungs corrode faster than in drier parts of the state, and the result is a sash that drops hard or won’t stay up. The fix is replacing the balance assembly with a corrosion-resistant shoe and spring rated for coastal salt air, not just lubricating what’s already failing.
- Targa Series sliding glass doors that bind on the bottom track. Doral sits on ground that can settle, and slab movement shows up as a Targa door panel that catches mid-track. Homeowners think it’s a wheel problem, but we often find the header has shifted slightly. We re-level the panel within the existing frame and replace the rollers with the correct durometer for the door’s weight, which stops the binding without forcing the frame out of square.
- Intercept warm-edge seal fogging on older CGI insulated glass units. The Intercept spacer system used in many CGI units can develop seal failure after 10 to 15 years in Florida sun, and the telltale is haze between the panes that comes and goes with temperature. Replacement is the only real fix, and we order glass packs sized to the original CGI frame, not aftermarket units that change the sightline.
- Failing weatherstripping on CGI fixed picture windows. The gaskets on fixed CGI frames compress over time, and once they lose their memory, water intrusion starts at the bottom corners during heavy afternoon storms. We replace the gaskets with the correct durometer for the frame profile and bed the glass properly so the next storm doesn’t find the same gap.
Our CGI Impact Windows & Doors Process
Every CGI job we take follows the same order of operations, because the opening has to be right before the window can be. That’s not a saying. That’s the sequence.
- 1
We measure the opening twice. Before we touch a single fastener, we verify the rough opening dimensions, check for racking, and confirm the existing CGI frame is still true. If the opening has moved, the new or repaired unit will never seat properly no matter how good the window is.
- 2
We diagnose and put the parts decision on paper. For a repairable unit, we identify exactly what failed and quote OEM CGI parts versus quality aftermarket parts side by side, with the difference explained. For replacements, we quote the CGI line that matches the home and discuss what has changed since the original was installed.
- 3
We do the repair or the replacement in one visit. Most CGI service jobs are completed in a single trip. No second appointment left hanging. The technician arrives with the parts for the job on the truck.
- 4
We test the unit after it’s set. Latch engagement, sash travel, seal seating, and water barrier continuity all get checked before we call the job done. If the pane is not true, the job is not done.
- 5
We register both warranty layers in writing. The Keystone Standard applies to every CGI job. The manufacturer warranty gets registered in your name and the workmanship guarantee is documented before we leave the driveway.
What CGI Impact Windows & Doors Costs in Doral
CGI work in Doral generally runs between $240 and $1,650 depending on whether we’re repairing hardware, replacing a glass pack, or setting a full replacement window. Here’s what that looks like in practice.
| Service | Typical Cost in Doral |
|---|---|
| Balance shoe or spring replacement on a single-hung | $240-$390 |
| Roller and track alignment on a sliding glass door | $310-$560 |
| Weatherstripping replacement on a fixed picture window | $180-$340 |
| Insulated glass pack replacement for a fogged CGI unit | $480-$1,100 |
| Full CGI impact window replacement, standard size | $1,200-$1,650 |
What moves the price is the series, the size of the unit, whether we’re replacing a glass pack or the whole frame, and whether the rough opening needs correction. Jobs that need a permit in Doral add a line item, and we pull permits and pass inspections. Call (386) 854-7948 for a written line-item quote. Estimates are free.
Why Doral Homeowners Call TruePane Windows & Doors for CGI Work
Dale Kessler founded TruePane Windows & Doors in 2008, and he’s been working impact-rated windows and doors across Miami-Dade for nearly two decades. His crews work on CGI units the way they work on every other brand: measure twice, set the frame right, and register every warranty in writing. We’re an authorized installer for more than a dozen lines including, PGT, and CGI, and if a homeowner is weighing a CGI replacement against a comparable series from, or PGT, we quote the options side by side on paper. A live person answers our phone 24 hours a day, seven days a week. When you call about a CGI unit that’s binding or leaking, you’ll talk to a person who knows what you’re asking.
FAQs
No. As an independent CGI service provider, we use OEM parts where the warranty requires them and document every repair. Where aftermarket parts are functionally identical and warranty-safe, we tell you that in writing and let you decide. No work we do voids a CGI warranty, and we register both warranty layers under The Keystone Standard. Call (386) 854-7948 with your unit model if you want us to check your specific warranty terms before scheduling.
Most CGI repairs are completed in a single visit after the initial diagnostic. Glass pack replacements take longer because the unit has to be fabricated to size, but a hardware repair on an Estate single-hung or a Targa door roller can typically be done the same week we inspect it. Call (386) 854-7948 and we’ll give you a straight answer on scheduling.
If the frame is still true and the failure is in the hardware, gaskets, or glass pack, repair makes more financial sense in most cases. If the frame has sagged from slab movement, or the unit is over 18 years old and failing in multiple places, a replacement window or door is the better use of your money. We give you both options in writing with prices side by side, and we won’t push a replacement where a repair serves you better. Call (386) 854-7948 for an honest read on your specific unit.
CGI replacement hardware and OEM glass packs are generally available, but regional supply can run slow. We keep the most common CGI hardware and weatherstripping on our trucks, and we order glass packs directly to spec for the frame size and series. Aftermarket parts, where appropriate and warranty-safe, can often speed up the job and bring the price down. Call (386) 854-7948 and we’ll tell you what’s in stock and what has to be ordered before you commit to anything.
Hardware repairs, gaskets, and glass pack replacements on the existing frame generally do not require a permit in Doral. Replacing a full window or door often does, and when a permit is required, we pull it and the work passes inspection before we close the job. Call (386) 854-7948 and we’ll confirm what applies to your specific project.
If your CGI windows or doors are giving you trouble in Doral, call TruePane Windows & Doors at (386) 854-7948 for a free estimate. We’ll show up on time, tell you what’s wrong in plain language, and put your options on paper. Done right, in writing, the first time.
Written by Dale Kessler, Owner, TruePane Windows & Doors at TruePane Windows & Doors, serving Doral and nearby areas.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.