Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Therma-Tru Impact Garage Doors: The Doral Owner’s Guide
If you’re searching for Therma-Tru impact garage doors in Doral, you’ve likely got a door that’s sagging, binding, or no longer sealing the way it did when it was installed. We stock Therma-Tru-compatible impact garage doors and replacement parts, and most swaps run between $1,800 and $4,200 installed depending on the series, size, and whether we’re replacing the door alone or the tracks and hardware too. Call (386) 854-7948 and we’ll tell you over the phone whether we’ve got your door on the truck. The usual first sign is a door that groans halfway up and then shudders before it settles, and in Doral’s humidity, the rollers and hinges are almost always the first casualties.
We’re an independent service provider, not affiliated with Therma-Tru. What that means for you is straightforward: we match the door to your opening, quote the manufacturer line on paper, and register both warranty layers before we leave your driveway. If the opening is not right, the door never will be, and that’s the rule Dale Kessler has run this company on since 2008.
Which Therma-Tru Models This Applies To
Therma-Tru doesn’t sell a residential garage door line under its own brand the way it sells entry doors, so most Doral homes with “Therma-Tru impact garage doors” are actually running a Therma-Tru entry door system paired with an impact-rated garage door from a manufacturer like PGT, CGI, or CWS. What we see most often in Doral are CGI Estate Collection and PGT WinGuard garage doors paired with Therma-Tru entry units on the same elevation. The compatibility question matters because the impact rating on the garage door has to match the rating on the Therma-Tru entry door beside it for the opening to meet Miami-Dade wind code.
Here’s the gotcha we run into constantly: the garage door label is not in the same place the entry door label is. On a Therma-Tru entry door, the certification sticker sits on the hinge stile. On an impact garage door, the label is usually riveted to the end stile or the bottom section, and after ten years of Doral sun, the ink washes out. We match by measuring the section thickness with a caliper and reading the roller stem diameter. Impact-rated sections run 2 inches thick minimum, and the rollers take 7/16-inch stems. Non-impact doors run 1-3/8-inch sections with thinner stems. If the section measures thin, the door was never impact-rated, and we’ll say so before we sell you a part that won’t pass.
For genuine Therma-Tru parts, we stock the full weatherstrip kit, threshold assemblies, and hinge kits for the SmoothStar and Classic-Craft lines. For the garage door side, we stock OEM-equivalent sections, rollers, hinges, and spring assemblies from the manufacturers Doral actually permits. Aftermarket equivalents are fine for rollers and hinges. For the sections themselves, we quote OEM first because the foam core density is what keeps the door from folding under wind load, and nobody’s aftermarket core has beat the factory spec yet.
Signs Your Therma-Tru Impact Garage Doors Is Failing
- Door shudders and groans on the way up – Rollers are flattened or the hinges are wearing oval at the pin. In Doral’s wet season, steel roller bearings rust out and start chewing the track. We see this on doors as young as five years.
- Wind-driven rain is getting under the door – The bottom astragal seal is cracked or the section has sagged enough to leave a gap at the jamb. Therma-Tru’s entry weatherstrip lasts a decade if it’s never painted over, but garage door bottom seals in Doral go in about half that.
- Door drifts down after it’s parked open – Springs are losing tension, or one has already snapped. If the door won’t stay put halfway, that’s not an adjustment issue, that’s a spring that’s done.
- Visible rust streaking the track or the hinges – Coastal air plus Doral’s afternoon downpours equals oxidation. Once the track’s pitted, the rollers can’t ride smooth and the whole assembly starts working against itself.
- You can see daylight around the door edges at noon – That’s the weatherseal gone or the jamb shifted. Light means air, and air means your AC bill climbs all summer.
Replacement Cost & What’s Included
In Doral, a new impact-rated garage door installed runs $1,800 to $4,200, and the range is driven by three things: the size of the opening, the series, and whether the tracks and hardware can be reused. A 16×7 impact door with standard hardware sits at the low end. A double door with the heavier wind-load rating required on some Doral elevations pushes toward the top. The door itself is roughly half the bill; the rest is tracks, tensioning, weatherseal, and the labor to hang it true.
We price the job as one number: parts, labor, and the warranty registration paperwork included. No surprise line items on the bill. We register both manufacturer warranty layers in writing before we leave, and our Done Right Promise covers the workmanship. If it’s not right, we make it right – no arguing, no fine print that covers neither. We’ll give you a written line-item quote before any work starts, so you see exactly what you’re paying for.
DIY or Call Us?
There are things an owner can safely do, and there are things you should not touch. You can inspect the weatherseal, the rollers, and the hinges visually. You can run the door up and down and listen. What you should not do is touch the torsion spring. That spring is under load at every moment, and a slip with a winding bar is a trip to the ER. Same with the cables – when a cable snaps, it comes across the garage like a bullwhip. We’ll say it plainly: if the spring or the cable is involved, call a trained professional. That’s us, at (386) 854-7948. If it’s just a squeaky roller or a replacement seal, we’ll walk through whether it’s worth your time. The opening has to be right before the door can be.
FAQs
A properly installed impact garage door in Doral lasts 15 to 20 years, but the seals and rollers will need replacement long before the sections give out. The sun and salt air cut hardware life to about half what manufacturers list for inland climates. Call (386) 854-7948 if you’re past year fifteen on the original install – a tune-up is cheaper than a replacement.
In most cases, yes, if the sections are still true and the foam core hasn’t been compromised. Rollers, hinges, springs, and seals are all replaceable. Once a section is dented or the core’s been wet, that section should be replaced, and sometimes that means the door. We stock repair parts on the truck for the most common impact door systems in Doral, and we’ll tell you honestly whether repair or replacement is the square deal.
A standard single-door replacement takes one day, typically four to six hours from tear-out to final test. Double doors or jobs requiring new track systems can run into a second day. We’ll tell you the schedule before we start, and we’ll be there when we say.
We stock weatherstrip kits, hinges, rollers, and threshold assemblies for Therma-Tru entry and impact systems, plus OEM-equivalent sections and hardware for PGT, CGI, and CWS garage doors. If we don’t have it on the truck, we can have it within a few days from our Orlando and Miami supply lines. Call (386) 854-7948 for a free estimate – estimates are free.
Call TruePane Windows & Doors in Doral
If your garage door is grinding, sagging, or letting Doral’s rain in, call us at (386) 854-7948. Dale Kessler grew up off NW 107th Avenue back when this city had more nurseries than subdivisions, and he’s spent the better part of two decades replacing and repairing impact doors across Miami-Dade. We background-check every technician, measure every opening twice, and register both warranty layers before the truck leaves your driveway. We stand behind it. Free estimates, written line-item quotes, and a live person answers the phone 24 hours a day. Call (386) 854-7948.
Written by Dale Kessler, Owner, TruePane Windows & Doors at TruePane Windows & Doors, serving Doral and nearby areas.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.



Before
After
Before
After
Before
After