French & Double Doors

French & Double Doors in Doral, FL | TruePane Windows & Doors

French and double doors are among the most requested openings we install across Doral. These are paired, impact-rated door units with laminated glass in every lite, built to hold up to South Florida’s weather while giving you wide, symmetrical sightlines between interior and exterior spaces. We sell and install them across our PGT, CGI, CWS, ES Windows, ECO, and Mr-Glass lines, with frames engineered for the Florida Building Code’s High-Velocity Hurricane Zone requirements. Whether you’re replacing a dated patio door near Doral Isles, upgrading a townhome off NW 87th Avenue, or building new near Downtown Doral, we measure, order, and install the unit to spec. Call (386) 854-7948 to talk through your opening.

Call (386) 854-7948

Product Overview - French & Double Doors

This door profile exists for one reason: Florida homeowners want wide openings that don’t compromise the building envelope when a storm rolls in. The design pairs two full-height door panels that meet in the center, with glass running through every lite so the unit reads as one continuous plane when closed. You get the classic French door look without sacrificing the impact performance required in Doral.

What separates an impact-rated French door from a decorative one is the engineering inside the panel. Every lite carries laminated impact glass with a PVB interlayer. The frame is reinforced to handle wind loads that would flex or buckle a standard patio door. And the hardware is not a single slide bolt at the top and bottom. These units use multi-point locking hardware, meaning the active panel locks at the head, sill, and meeting stile simultaneously. That gives you a tighter seal against wind-driven rain, better forced-entry resistance, and a more rigid assembly under pressure.

Architecturally, these doors work wherever you want a paired opening: a rear patio facing a Doral lake, a second-floor balcony off a primary suite, a courtyard entry in a Mediterranean-style home, or a wide living-room opening onto a covered lanai. The aluminum and vinyl frame options mean we can match the look to the rest of the house, whether that’s a clean modern profile or a more traditional stile-and-rail appearance.

The critical distinction for Doral buyers: this is not a big-box patio door that happens to be labeled “impact.” These units are specified per opening, with a design pressure calculated for the home’s actual wind zone. We verify the numbers before we order anything. That level of care is what makes the door perform when it matters.

Technical Specifications

The table below covers the core specs for the French and double door units we quote and install in Doral. Every configuration is verified against the wind zone before the order is placed.

• Frame materials: Aluminum or vinyl, selected for the opening and finish requirements
• Maximum width: Up to 96 inches wide for paired configurations
• Glass options: Laminated impact glass with PVB interlayer, Low-E insulated glass, tinted glass, or clear glass
• Finish options: White, almond, bronze, black, and tan
• Locking hardware: Multi-point locking at head, sill, and meeting stile
• Glass coverage: Laminated impact glass in every lite, no unprotected glazing pockets
• Compliance path: Miami-Dade NOA and Florida Product Approval numbers issued per configuration

We stock and order both aluminum and vinyl depending on the application. Aluminum carries a slimmer sightline and is common on modern and mid-century Doral homes. Vinyl is a strong thermal performer and works well where the budget or HOA profile calls for it. Both are finished in the five colors above, so we can match existing window frames or establish a new trim color for the home.

Hurricane & Compliance Performance

Here are the six performance features that matter on every French and double door we quote in Doral.

Laminated Impact Glass

Every lite carries a PVB (polyvinyl butyral) interlayer sandwiched between two panes of glass. If a piece of wind-borne debris hits the panel, the glass may crack but the interlayer holds it in the frame. The opening stays sealed. That’s the core mechanism behind any legitimate impact-rated door, and it’s standard on every unit we order.

Miami-Dade NOA / FL Product Approval

These doors carry Miami-Dade NOA (Notice of Acceptance) and Florida Product Approval numbers, issued per configuration. That means the specific door we quote for your opening, with your frame material, glass package, and size, has been reviewed and approved for use in HVHZ jurisdictions like Doral. We verify the applicable numbers on your quote before you commit.

FBC/HVHZ Compliance

The units are engineered to Florida Building Code (FBC) High-Velocity Hurricane Zone (HVHZ) requirements. Doral sits squarely in the HVHZ, so any exterior door we install has to meet those standards. There is no downgrade path. We spec to the code, not around it.

TAS 201 / TAS 202 / TAS 203 Testing Context

The protocol family these products are tested under includes TAS 201 (large-missile impact), TAS 202 (cyclic wind-pressure loading), and TAS 203 (forced-entry resistance). TAS 201 simulates a piece of lumber hitting the glass. TAS 202 pressures the assembly repeatedly after impact to confirm it holds. TAS 203 tests whether the locking system resists someone trying to force the door open from the outside.

Design Pressure Match to Your Wind Zone

Design pressures are matched to your wind zone, up to +/-100, and never higher. We don’t overspec a door beyond what your Doral home actually needs. The number on your quote reflects the wind zone, the building height, and the opening location. Overselling rating capacity is a cost you don’t need to pay.

Energy Performance Options

Low-E and insulated glass options are available on these doors for thermal performance and interior comfort. A west-facing door in Doral takes serious afternoon sun, and an insulated or Low-E package changes how that room feels in July. Clear and tinted glass round out the lineup for homes where glare or heat are the bigger concern.

Color & Glass Options

The five finish options cover most of what we see across Doral. White and almond are the workhorses for stucco homes with soft coastal palettes, especially in the older sections of Doral and the townhome communities off 107th Avenue. Bronze and black read more contemporary and pair well with darker window frames, modern railings, and the newer spec homes going up near Downtown Doral. Tan sits between the two, often chosen on Mediterranean-influenced elevations where a white frame would be too stark against earth-tone stucco.

On the glass side, clear laminated impact glass is the baseline, and it looks like standard glass unless you’re up close. Tinted glass cuts glare in rooms with direct western exposure, which is useful for a double door that opens onto a pool deck with no shade structure. Low-E insulated glass is the package we recommend when the door faces open sky or afternoon sun, since it reduces heat transfer into the room. The PVB interlayer is present in every option, so energy performance never comes at the cost of impact protection.

Installation by TruePane Windows & Doors in Doral

Installation is where an approved product either performs or fails. The NOA rating on a French door means nothing if the frame is set out of square, the perimeter seal is inconsistent, or the rough opening wasn’t inspected before the old unit came out. We treat the install as part of the product, not an afterthought.

Our process in Doral starts with a pre-install inspection. We measure the rough opening in three places, check the condition of the surrounding framing, and confirm the floor is level before we order the unit. When a concrete slab has settled, which happens in parts of Doral, we address the opening so the door sits flat. A door that binds at the top corner is usually an opening problem, not a door problem.

We set every unit level, plumb, and square. That means the head is level, the side jambs are plumb, and both diagonal measurements match. We follow AAMA 2400/2410 installation practice, which is the standard for exterior fenestration in this application. The perimeter is sealed with AAMA 812 low-expansion foam, and the exterior side is detail-sealed to keep wind-driven rain out of the rough opening. After the door is set and the hardware is adjusted, we run a water test on the sill and threshold to confirm the drainage path works.

Permitting matters in Doral. This is an HVHZ jurisdiction, and the permit office will ask for the NOA or Florida Product Approval documentation on the specific door you bought. We provide that documentation as part of the project, and we’re familiar with what Doral’s reviewers ask for. If the door doesn’t match the approved configuration, the permit gets held up. We make sure the paperwork and the product line up before the installation date.

The reason we emphasize professional installation on this product is simple. An impact-rated French door is an engineered system. The glass, frame, hardware, and sealant all depend on each other to pass the wind and water tests the unit is rated for. A door installed by a general handyman with no fenestration experience can look fine and leak in the first storm. In Doral, that’s not an acceptable risk.

Frequently Asked Questions - French & Double Doors

Get a Quote - French & Double Doors in Doral

If you’re planning a French or double door replacement or new install in Doral, we’ll measure the opening, verify the wind zone, and quote the exact door with the correct glass and finish for your home. Call (386) 854-7948 to schedule a free on-site measurement and get a written line-item quote.

Written by the team at TruePane Windows & Doors, serving Doral, FL and surrounding Miami-Dade communities.