Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Single Hung Windows in Doral, FL | TruePane Windows & Doors
Single hung windows are one of the most common replacement profiles we install in Doral homes. The top sash stays fixed while the bottom sash lifts to open, and when built with laminated impact glass, the whole unit becomes part of your hurricane protection system rather than a weak point in it. We install these across our PGT, CGI, CWS, ES Windows, ECO, and Mr-Glass lines, sized and glazed for your specific wind zone. If you’re replacing old aluminum single hung units or planning new construction in Doral, call TruePane Windows & Doors at (386) 854-7948 to talk through options and get a free on-site measurement.
Product Overview - Single Hung Windows
A single hung window has a fixed upper sash and an operable lower sash. That lower sash slides up on a track, while the top stays put, which is why you see this profile all over South Florida townhouses, ranch homes, and second-story bedrooms. It’s simple to operate, easy to clean from inside, and when the lower sash is closed and locked, the unit performs as a complete impact-rated assembly.
What makes the impact version different from a standard single hung is the glass package and the hardware. We build these with laminated impact glass, meaning two panes bonded with a PVB interlayer that holds the glass in the frame even when struck by windborne debris. The frame, whether aluminum or vinyl, is engineered to keep that glass where it belongs during cyclic wind loading. That’s the core of HVHZ-rated design: the whole unit works together, not just the glass.
Architecturally, single hung windows fit cleanly into Florida homes where existing openings were framed for this exact profile. Many Doral properties built in the 1990s and 2000s have original single hung units, which means replacing them with impact-rated versions rarely requires reframing the opening. The look stays familiar, the footprint stays the same, and the performance jumps dramatically. For homeowners who want hurricane protection without changing their home’s character, this is usually the most practical path.
TruePane Windows & Doors installs this product daily across Doral, including the residential corridors near Doral Isles, Downtown Doral, and the neighborhoods west of the Turnpike. Each installation gets the same treatment: level, plumb, square, and sealed.
Technical Specifications
- Frame materials: Aluminum or vinyl, both available in impact-rated configurations specific to your opening size and wind zone.
- Glass options: Laminated impact glass with a PVB interlayer, Low-E insulated glass, tinted glass, and clear glass. Mix and match based on exposure and energy goals.
- Finish options: White, almond, bronze, black, and tan. Painted or anodized finishes depending on frame material and manufacturer line.
- Screen options: Half screen or full screen, both removable from the interior side for cleaning and seasonal storage.
- Design pressure: Matched to your specific wind zone, up to +/-100, never higher than what your opening actually requires.
- Compliance documentation: Miami-Dade NOA and Florida Product Approval numbers issued per configuration, supplied with your quote and permit submittal package.
- Sill and track options: Available in standard sill profiles and high-performance sill designs depending on the product line selected.
Hurricane & Compliance Performance
Laminated Impact Glass - The glass in these windows is built with a PVB interlayer sandwiched between panes. When debris hits, the glass may crack, but the interlayer holds the broken pieces in the frame. Your opening stays sealed until the storm passes, which is exactly what Doral homeowners need when a storm’s outer bands sit over Miami-Dade for hours.
Miami-Dade NOA / Florida Product Approval - Every configuration we quote carries a Notice of Acceptance or Florida Product Approval number specific to that size, frame, and glass package. We provide those numbers with your quote so your permit application has what the building department asks for. No generic approval hand-waving, just the actual documentation tied to your specific window.
FBC / HVHZ Compliance - Single hung windows from TruePane Windows & Doors are engineered to Florida Building Code High-Velocity Hurricane Zone requirements. Doral sits inside the HVHZ, so this is not a marketing checkbox. It’s a code requirement for permitted replacement windows, and we treat it that way on every residential project.
TAS 201 / 202 / 203 Testing Context - These windows are tested under the protocol family that governs HVHZ-rated products. TAS 201 covers large-missile impact, TAS 202 covers cyclic wind-pressure loading, and TAS 203 covers forced-entry resistance. A window that passes those three tests has been asked to do real work, not just hold a sticker on a showroom floor.
Design Pressure for Your Wind Zone - We engineer each opening to the design pressure required for its location and elevation, up to +/-100. If your home sits in a lower-wind zone, we don’t upsell you a heavier, more expensive unit than you need. You get the right rating for the orifice and exposure, which is how a responsible Doral installer works.
Energy Performance (Low-E / Insulated Glass) - For homes with west-facing glass or rooms that run warm in the afternoon, Low-E insulated glass reduces heat transfer while keeping the impact rating intact. Tinted glass is an option for glare-heavy exposures, and clear glass suits homeowners who want maximum visible light with no color shift. Each choice changes the energy profile, so we spec them per room, not per house.
Color & Glass Options
Finish color on a single hung frame does more than look nice. It sets the tone for the whole elevation, and in Doral’s mix of Mediterranean, coastal contemporary, and modern Florida architecture, the right finish matters. White is our most ordered color, and it reads crisp on stucco homes from Doral Isles to the older villa-style communities off 107th Avenue. Almond and tan blend with beige and sand-toned exteriors, which are common on early-2000s Doral builds. Bronze and black work well on modern two-story homes where darker trim anchors the facade and frames the glass against a white or gray exterior.
Glass selection typically comes down to three considerations: storm performance, heat gain, and privacy. Laminated impact glass is the baseline for every unit we install in Doral, whether it’s in a bedroom window or a living room opening facing the golf course. Add Low-E insulation if the room gets direct afternoon sun and you’re tired of the AC running constantly. Tinted glass helps with glare on east-facing breakfast rooms and home offices. Clear glass maximizes natural light for shaded elevations or homeowners who don’t want any shift in how their walls look from the outside. We walk every customer through the options at the estimate so the spec is purposeful rather than a default.
Installation by TruePane Windows & Doors in Doral
Installation is where an impact-rated window either performs or doesn’t. A window can carry every NOA and Florida Product Approval in the book, but if the perimeter is not sealed correctly or the frame is racked out of square, the rating is compromised before the first storm. That’s why we install single hung windows the way the Florida product approval intended: level, plumb, square, and tied to the rough opening with a continuous seal.
Our process starts before the window arrives. We inspect the existing opening for rot, termite damage, or framing that has drifted out of tolerance. Doral homes built on fill or slab foundations can settle over time, and a window opening that’s out of square by a quarter inch needs correction before the new unit goes in. We measure every opening independently, never assume symmetric sizes across a house.
During installation, we set the frame level and plumb, shim it firmly, and anchor per the manufacturer’s tested method for that specific configuration. The perimeter gets a continuous bead of AAMA 812 low-expansion foam sealant, which seals the frame to the rough opening without bowing the jambs. We follow AAMA 2400/2410 practice for window installation and flash the opening so bulk water drains to the exterior, not into the wall cavity. After the unit is installed and the interior trim is done, we run a water test on the sill and lower sash to confirm drainage. Cleanup happens the same day.
Permitting in Doral is a reality for impact window replacement. The city and Miami-Dade County both require product approvals in hand before work starts. We provide the NOA or Florida Product Approval numbers for your exact configuration with the quote, and we handle the permit coordination so the inspection passes with documentation to spare. Improper installation is the fastest way to void what you paid for. We’d rather be the contractor who does it right the first time.
Frequently Asked Questions - Single Hung Windows
Design pressure is matched to your specific wind zone and opening location, up to +/-100. The rating is per configuration, so a second-story corner window on a Doral home may carry a different design pressure than a ground-floor window on the same elevation. Your quote will list the exact rating for every opening.
Lead time varies by manufacturer line and configuration. Custom sizes and less common finishes typically add production days, while standard white and almond units move faster. We’ll give you a written lead time on your quote, and we coordinate installation around it so the order and the schedule line up. Call (386) 854-7948 to get current timing for your specific openings.
Yes. Doral is in the HVHZ, and the building department will ask for the product approval documentation matching your exact window configuration. We include the NOA or Florida Product Approval numbers with your quote and take care of the permit submittal so the paperwork is complete before the first window comes out.
Sizes are built to your measured openings, not pulled from stock and shimmed to fit. Glass type, frame material, finish color, and screen configuration are all selected per opening. If an opening is unusually wide or tall, we may recommend a different profile or a mulled configuration, and we’ll explain why at the estimate.
Keep the lower track clear of sand and debris, especially after Doral’s summer storms blow grit onto sills. Wash frames with mild soap and water, and avoid abrasive pads on painted or anodized finishes. The operable sash has a balance mechanism that should be inspected if the window gets hard to lift. Call us at (386) 854-7948 if a window starts binding, we’ll troubleshoot it before it becomes a bigger problem.
Get a Quote - Single Hung Windows in Doral
Replacing your windows is a five-figure decision, and you should know exactly what you’re getting before you sign. We provide written, line-item quotes with the product approvals, design pressures, and installation scope spelled out for every opening. Call TruePane Windows & Doors at (386) 854-7948 to schedule your free on-site measurement in Doral, or start a project online and we’ll confirm a time.
Written by the team at TruePane Windows & Doors, serving Doral, FL since day one.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.
Other TruePane Windows & Doors Services
What Neighbors Say About TruePane Windows & Doors
Detailed Images



Before
After
Before
After
Before
After