Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Fast, Reliable Energy-Efficient Windows Across Westchester
Energy-efficient window replacement in Westchester runs roughly $850 to $1,850 per opening installed, with whole-home retrofits on 1950s-1970s CBS ranches typically landing between $9,500 and $24,000 depending on size and frame condition. The number that matters more than any range is this: in Westchester you’re not buying windows the way a homeowner in Ohio buys windows. You’re inside Miami-Dade’s High Velocity Hurricane Zone, which means every replacement unit has to carry a Miami-Dade Notice of Acceptance (NOA), the county permit gets pulled before we touch the first screw, and the rough opening in your 1960s concrete block wall was sized for a narrow jalousie unit, not a modern insulated sash. We’ve measured hundreds of openings along SW 8th Street, Bird Road, and the side streets off Coral Way, and we quote from the field, not from a national size chart. If you’re weighing options, call (386) 854-7948 and we’ll walk you through what actually applies to your house.

Why TruePane Windows & Doors Is Westchester’s Preferred Energy-Efficient Windows Company
TruePane has worked on the dense grid of CBS ranch homes that defines Westchester for years, and the pattern is consistent. Original single-pane aluminum and jalousie frames, salt-laden air chewing through weatherstripping, and owners who want the utility bill down without losing the Miami-Dade compliance they’re legally required to maintain. Dale Kessler founded this company on a rule that fits this neighborhood squarely: if the pane is not true, the job is not done. We bring that standard to every opening we measure, every NOA-certified unit we order, and every permit we close with the county.
Westchester homeowners call us because the work holds up. Background-checked, uniformed technicians measure every opening twice. We register both manufacturer warranty layers in writing before the truck leaves the driveway, and the Done Right Promise means if something is out of true after we leave, we return and make it right. No paperwork fight. No arguing. The same crew that measured your jalousie openings off SW 16th Street is the crew that flashes the new sill pan and walks the county inspection with you.
We’re not the cheapest bid in Westchester, and we don’t intend to be. We’re the last call you make on a window because the price we quote is the price on the bill, the schedule we give is the schedule we keep, and a live person answers the phone 24 hours a day, 7 days a week. No voicemail tree, no regional call center. When a Westchester homeowner calls at 7:00 on a Sunday morning with water coming through a failed frame, a person picks up.
Our Energy-Efficient Windows Services in Westchester
Low-E & Argon Gas Glass
Low-E coatings and argon gas fills are where most of the real thermal performance comes from in a Westchester window. The coating reflects infrared heat back toward the source, which means less afternoon sun loading up your living room, and argon between the panes cuts conductive heat transfer through the glass itself. In a CBS house with original single-pane aluminum, upgrading to double-pane low-E with argon typically drops the solar heat gain through that opening by half or more. In our experience on Westchester homes, the glass pack matters as much as the frame, and we quote glass packages side by side on paper so you can see the difference before you sign.

ENERGY STAR Replacement Windows
ENERGY STAR certification is a solid baseline, but in Westchester it’s a floor, not a ceiling. The Southern zone rating covers solar heat gain and U-factor, and it’s useful for comparing units. What it doesn’t cover is the HVHZ impact requirement, which is why we carry ENERGY STAR-rated units from manufacturers like Jeld-Wen and Simonton that also hold current Miami-Dade NOA product approvals. You get the efficiency rating you want and the code compliance the county requires, in the same frame. If you’re ordering windows for a detached structure or ADU, the same rule applies: efficiency without the NOA won’t close a permit here.

Double & Triple Pane Windows
Double-pane is the standard starting point for most Westchester retrofits. Triple-pane adds a third lite and an additional insulating cavity, which helps with noise and further cuts heat transfer, but it’s heavier and costs more, and not every 1960s rough opening is built to carry that weight cleanly. We quote both where they make sense and tell you straight when triple-pane is not worth the upcharge for a particular elevation. On west-facing walls along Bird Road that catch full afternoon sun, triple-pane with low-E can pay for itself in comfort and cooling load; on a shaded north wall, double-pane does the job.

UV-Blocking & Fade Protection
Westchester’s subtropical sun is hard on furniture, flooring, and window treatments. Hardwood floors fade, upholstery bleaches, and artwork pinks within a few seasons behind untinted, single-pane glass. UV-blocking low-E coatings filter most of the UV spectrum without turning the glass dark, and we carry tinted and solar glass options for elevations that need more aggressive heat rejection. A home off Coral Way with a west-facing living room generally wants a different glass package than a unit shaded by a mature oak on the north side, and we spec accordingly. The goal is protecting what’s inside the house without living in a cave.

What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Westchester
TruePane is an authorized installer for more than a dozen manufacturer lines, and for Westchester homes we regularly quote, and PGT. Each of those lines offers impact-rated, energy-efficient units with current Miami-Dade NOA approvals, and we stock the installation components those brands specify, not generic substitutes. It matters here because the county inspector checks product approvals against the permit, and a substitute sealant or flashing detail can fail an inspection. We order manufacturer-certified glass, we register both warranty layers in writing, and we install to the brand’s HVHZ protocol. You see the line items on the quote, so you know exactly what you’re paying for and which warranty covers which part.

Common Energy-Efficient Windows Problems We See in Westchester Homes
- Seal failure from salt-laden humidity. Miami-Dade’s coastal air carries salt and moisture that works into the edge seals of insulated glass units faster than inland markets. We regularly replace decade-old impact-rated windows in Westchester where the argon has leaked out and the glass has fogged between the panes, often with water creeping along the failed weatherstripping at the CBS wall-to-frame joint.
- Stock-size orders that don’t fit 1960s jalousie rough openings. The original openings in Westchester’s CBS ranch homes were framed for narrow jalousie units, and modern double-hung or casement windows rarely land on those dimensions. Ordering off a big-box size chart routinely results in custom-size reorders or opening-day masonry cutbacks, which adds hundreds per opening and delays the permit.
- Frame corrosion eating through aluminum. The same salt-laden air that fogs glass also pits and corrodes aluminum frames, especially along coastal-adjacent corridors. By the time the homeowner notices the sticking sash or the peeled finish, the frame has often lost structural integrity at the corners, and the fix is full replacement, not a hardware adjustment.
- Permit failures on outbuildings and ADUs. County-rules properties in Westchester with detached workshops, garages, or permitted ADUs sometimes get non-NOA rated window units installed to save cost. The county inspector flags the install at final, the owner has to re-order certified glazing to close the permit, and a job that should have been one visit becomes three.
Pricing for Energy-Efficient Windows in Westchester, FL
Here’s what we actually see on Westchester jobs. A standard low-E, argon-filled, double-pane impact-rated window installed runs $850 to $1,450 per opening for typical 1960s CBS rough openings. Larger openings, triple-pane glass, or casement conversions can push that to $1,850 or more per unit. A whole-house retrofit on a 3-bedroom ranch generally lands between $9,500 and $24,000, and the two biggest price movers in Westchester specifically are custom sizing and masonry work. Because the original jalousie rough openings are narrower than nominal modern frames, expect roughly 30 percent of the windows we quote here to be custom-size orders. Masonry modifications to widen an opening run $400 to $900 per opening depending on the lintel and how much block has to be cut back. We field-measure every opening before quoting, so the number you get is the number you pay. No change orders on opening day. Call (386) 854-7948 and we’ll measure and give you a written line-item quote at no cost.
We Also Serve Cities Near Westchester
We work throughout the neighborhoods that surround Westchester, including Doral, Fountainebleau, Kendale Lakes, and Kendall West. If you’re on the edge of Westchester or just outside the city line, call (386) 854-7948 and we’ll confirm the service area. For homeowners researching options across the region, our Energy-Efficient Windows overview page covers the full range of what we install. For a closer look at what applies specifically in this city, read our page on Energy-Efficient Windows in Westchester.
Serving Westchester, FL - Our Local Coverage Area
We’re based in the Westchester area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Energy-Efficient Windows in Westchester
Because the 1960s CBS rough openings in Westchester were framed for narrow jalousie units, and those dimensions rarely line up with modern nominal window sizes. A field measure catches the quarter-inch to two-inch differences that determine whether you can use a stock unit or need a custom-size order, and custom sizing can add $200 to $500 per window. We measure every opening twice before we quote, and the quote reflects the field measurement, not a size chart. Call (386) 854-7948 to schedule a free measurement.
No. ENERGY STAR is an efficiency rating, not a hurricane code approval. Westchester sits inside Miami-Dade’s High Velocity Hurricane Zone, and every replacement window must carry a current Miami-Dade Notice of Acceptance (NOA) product approval regardless of its ENERGY STAR status. We quote units from lines like Jeld-Wen, Simonton, and PGT that carry both, and we register both the efficiency documentation and the NOA with your permit. Call (386) 854-7948 and we’ll show you certified options side by side.
Yes. Window replacement in unincorporated Miami-Dade County, including Westchester, is a permitted alteration, and under HVHZ rules the installation has to follow county protocol. That includes product approvals, installation methods, flashing details, and a final inspection. We pull the permit, we meet the inspector on site, and we close the permit before we consider the job done. If a contractor tells you a permit isn’t needed for a Westchester window replacement, that’s your signal to call someone else.
Significant, and it compounds every summer. Jalousie louvers don’t seal even when closed, so conditioned air leaks continuously, and single-pane aluminum conducts heat straight through the frame. We’ve measured U-factors on original Westchester units that run two to three times higher than a modern low-E double-pane. The leak isn’t just an efficiency loss; those original units are also non-compliant under current hurricane codes, which means the replacement isn’t optional forever. The upgrade pays in cooling load now and in code compliance when you need it. For a full audit of what your windows are losing, call (386) 854-7948.
Any permanently installed window on a detached structure that was permitted through the county has to meet the same HVHZ and NOA requirements as the main house. We see this go wrong when an owner or handyman installs non-certified units to save money, and the county inspector flags the install at final inspection. The reorder and reinstallation cost more than the initial savings. We quote certified units for main house and outbuildings the same way, and the permit covers all of it. Written line-item quote, no surprises. Call (386) 854-7948 to schedule a site visit and see what applies to your property.
If you’re ready to stop paying for windows that leak air, heat, and money, call TruePane Windows & Doors at (386) 854-7948 for a free estimate. We’ll measure, quote manufacturer lines side by side on paper, and register both warranty layers before the truck leaves the driveway. Done right, the first time, in writing.
Written by Dale Kessler, Owner at TruePane Windows & Doors.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.



Before
After
Before
After
Before
After